Epoxy & Industrial Flooring Contractor — Troy, Michigan
Maverick Performance Solutions is an industrial resinous flooring manufacturer, contractor, and supplier serving Troy, Michigan from its Farmington Hills headquarters. We engineer, manufacture, and install our own epoxy, urethane cement, epoxy mortar, and concrete repair systems for Troy's automotive suppliers, tech facilities, and commercial interiors — and answer every scope request with an engineered recommendation within 48 hours.
Built for the Floors Troy Actually Runs On
Troy is Oakland County's business engine — automotive supplier headquarters and tech centers along the I-75 corridor, engineering labs, and the Big Beaver corridor's offices, showrooms, and commercial interiors. Those buildings carry very different floors, and Maverick engineers a specific answer for each one, a short drive from our Farmington Hills headquarters and manufacturing facility.
This is a market that reads specifications for a living. Supplier plants and validation labs buy floors by the data sheet, and that's how we built our catalog: nine Mav product families and 31 products, every one traced to its own technical data sheet, manufactured by the same company that installs it.
What Working With the Manufacturer Gets You
- Site assessments within days. Traffic, chemistry, moisture, and joints get measured on your slab before anything is specified.
- A response within 48 hours. Scope requests come back with an engineered build-up recommendation and budget direction inside two days — that's our standing promise.
- Mobilization from our own shop. Crews and factory-batched material stage out of Farmington Hills — efficient, project-specific mobilization, quoted up front.
- Shutdown-window scheduling. Weekend, overnight, and holiday installs are standard practice — we phase floors around production and business hours, not the other way around.
- One accountable party. We design the system, manufacture it, install it with our own crews, and warrant the result — no manufacturer-versus-installer finger-pointing.
The Systems Troy's Facilities Actually Need
Automotive supplier plants, tech and R&D facilities, and commercial interiors each fail in their own way. Every system below is engineered, manufactured, and installed by Maverick — matched to your traffic, chemistry, and shutdown window, with every quantitative claim traced to its technical data sheet.
Epoxy Flooring
MavCoat 100% solids epoxy systems — self-leveling, high-build, broadcast, and metallic — from a nominal 16–30 mils for supplier production and assembly traffic up to ¼″ MavClad EM epoxy mortar for heavy duty.
Epoxy Flooring ContractorWarehouse Floor Coatings
Forklift-rated epoxy bodies, joint rebuilds, and coated-in demarcation striping for Troy's supplier warehouses and distribution space — installed aisle-by-aisle so operations never fully stop.
Warehouse Floor CoatingsConcrete Floor Repair
Spalls, failed joint shoulders, bolt holes, and deteriorated slabs rebuilt with MavPatch, MavRapidPatch, and MavGrout USP — many repairs back in service the same shift.
Concrete Floor RepairMetallic Epoxy
Showroom-grade MavCoat Metallic floors for Big Beaver corridor lobbies, retail spaces, and dealerships — decorative depth on an industrial-duty body.
Metallic Epoxy FlooringUrethane Cement
MavCrete UM cementitious urethane rated for thermal shock through 250°F washdown — the answer for commercial kitchens, cafeterias, and wet process areas in Troy's corporate campuses.
Urethane Cement FlooringCommercial Kitchen Flooring
Seamless, coved MavCrete floors that replace failing quarry tile — sloped to drain, slip-textured by zone, and installed overnight so the kitchen opens on time.
Commercial Kitchen FlooringSpecifying a floor rather than buying one? Full build-ups, cross-sections, and typical properties live on the MavCoat epoxy, MavCrete urethane cement, and MavClad troweled mortar system pages, and specifiers can assemble any build layer-by-layer in the System Builder.
Why a Manufacturer-Installer Beats a Re-Seller
Most flooring bids in Troy are a subcontract: a local applicator, someone else's resin, and a warranty that lives in the gap between them. When the floor fails, the applicator blames the material and the material rep blames the install. Maverick closes that gap — we engineer the system, manufacture it in Farmington Hills, install it with our own crews, and warrant the result. The specification, the material, and the crew arrive together, and material and workmanship are warranted by the same company that engineered the system. For the supplier plants and tech facilities that buy floors by the data sheet, that's the difference between a spec and a sales sheet.
Garage & Basement Floors, Manufactured Here
Troy homeowners get the same materials our industrial customers stand on — not a re-labeled hardware-store kit. MavCoat epoxy bodies with broadcast or metallic finishes turn a garage or basement slab into a seamless, cleanable, chemical-resistant floor that shrugs off road salt, motor oil, and tire traffic.
The material comes out of our own Farmington Hills factory, the crew that installs it is ours, and the company that made it stands behind it. If you'd rather see the chemistry first, browse the epoxy systems or the decorative metallic epoxy finishes before you call.
What a Troy Garage or Basement Gets
- Industrial-grade chemistry. The same MavCoat 100% solids epoxy families we install in plants, matched to a residential slab.
- Broadcast or metallic finishes. Slip-textured quartz broadcast for the garage, decorative metallic depth for the finished basement.
- Repairs handled first. Spalls, pitting, and failed joints rebuilt before anything is coated — a floor is only as good as the slab under it.
- One accountable party. Manufacturer, installer, and warranty under one roof, a short drive from our Farmington Hills headquarters and manufacturing facility.
Where We Work Around Troy
Full coverage across Troy and its Oakland County neighbors, from our Farmington Hills shop out. Beyond the county, we install across Metro Detroit, Michigan, Ohio, and the Midwest — see all service areas.
- Troy
- Rochester Hills
- Auburn Hills
- Sterling Heights
- Madison Heights
- Royal Oak
- Birmingham
- Clawson
Troy Questions, Answered Straight
Do you serve Troy, Michigan?
Yes — Troy is core Oakland County territory for us, a short drive from our Farmington Hills headquarters and manufacturing facility. Crews and factory-batched material mobilize from our own shop, site assessments are typically scheduled within days, and every scope request gets an engineered recommendation and budget direction within 48 hours — that's our standing promise. Call (313) 889-2526 to start.
Can you install around production and business hours in Troy?
That's standard practice, not a special request. Weekend, overnight, and holiday installs are how most Troy floors go in — supplier plants phase area-by-area around production, and offices, showrooms, and commercial interiors are typically coated after hours so the doors open on schedule. Phasing is engineered into the crew plan before anyone mobilizes.
Do you install residential garage and basement floors in Troy?
Yes. Troy garages and basements get the same manufactured systems our industrial customers stand on — MavCoat epoxy bodies with broadcast or metallic finishes, installed by the same crews. No re-labeled hardware-store kits; the material comes from our own Farmington Hills factory, and the same company that made it installs it and stands behind it.
Running a plant floor under production traffic? See how these systems hold up on our manufacturing flooring page, or browse real installs in the project gallery.
Scope Your Troy Floor
Tell us the square footage, traffic, and exposure. An engineered build-up recommendation and budget direction come back within 48 hours — that's our promise, from a shop a short drive away in Farmington Hills.