Industrial & Epoxy Flooring Contractor — Livonia, Michigan
Maverick Performance Solutions is an industrial resinous flooring manufacturer, contractor, and supplier serving Livonia, Michigan. We engineer, manufacture, and install our own epoxy, urethane cement, epoxy mortar, and concrete repair systems for Livonia's manufacturing plants, machine shops, and warehouse floors — a short drive from our Farmington Hills headquarters and manufacturing facility, with an engineered recommendation on every scope request within 48 hours.
Built for Livonia's Manufacturing Corridors
Livonia is one of Wayne County's working cities — industrial parks full of manufacturing plants, machine shops, tool-and-die operations, and warehouse and distribution floors that run hard every shift. Those floors take forklift wheels, point loads, cutting oil, coolant, and pallet traffic, and when one fails, production waits on the fix.
That is exactly the work our catalog was built for: nine Mav product families and 31 products, every one traced to its own technical data sheet, manufactured by the same company that installs it. And Livonia is home-market territory — a short drive from our Farmington Hills headquarters and manufacturing facility, so crews and factory-batched material mobilize without a logistics project in the middle.
What Livonia Facilities Get From Us
- Site assessments within days. Walking your floor is a short drive, not a scheduling project — traffic, chemistry, moisture, and joints get measured before anything is specified.
- A response within 48 hours. Scope requests come back with an engineered build-up recommendation and budget direction inside two days — that's our standing promise.
- Mobilization from our own shop. Crews and factory-batched material stage out of Farmington Hills — efficient, project-specific mobilization, quoted up front.
- Shutdown-window scheduling. Weekend, overnight, and holiday installs are standard practice — we phase floors around production, not the other way around.
- One accountable party. We design the system, manufacture it, install it with our own crews, and warrant the result — no manufacturer-versus-installer finger-pointing.
The Systems Livonia's Facilities Actually Need
Every system below is engineered, manufactured, and installed by Maverick — matched to your traffic, chemistry, and shutdown window, with every quantitative claim traced to its technical data sheet.
Epoxy Flooring for Plants & Machine Shops
MavCoat 100% solids epoxy systems — self-leveling, high-build, broadcast, and metallic — from a nominal 16–30 mils for production and warehouse traffic up to ¼″ MavClad EM epoxy mortar for heavy duty around mills, lathes, and presses.
Epoxy Flooring ContractorWarehouse Floor Coatings
Forklift-rated epoxy bodies, joint rebuilds, and coated-in demarcation striping for Livonia's warehouse and distribution floors — installed aisle-by-aisle so operations never fully stop.
Warehouse Floor CoatingsConcrete Floor Repair
Spalls, failed joint shoulders, bolt holes, and deteriorated slabs rebuilt with MavPatch, MavRapidPatch, and MavGrout USP — many repairs back in service the same shift.
Concrete Floor RepairUrethane Cement
MavCrete UM cementitious urethane rated for thermal shock through 250°F washdown — the answer wherever a Livonia facility runs hot processes, washdown cycles, or food and beverage service.
Urethane Cement FlooringMetallic Epoxy
Showroom-grade MavCoat Metallic floors for front offices, lobbies, and retail spaces — decorative depth on an industrial-duty body.
Metallic Epoxy FlooringCommercial Kitchen Flooring
Seamless, coved MavCrete floors that replace failing quarry tile — sloped to drain, slip-textured by zone, and installed overnight so the kitchen opens on time.
Commercial Kitchen FlooringSpecifying a floor rather than buying one? Full build-ups, cross-sections, and typical properties live on the MavCoat epoxy, MavCrete urethane cement, and MavClad troweled mortar system pages, and specifiers can assemble any build layer-by-layer in the System Builder.
Why a Manufacturer-Installer Beats a Re-Seller
Most flooring bids a Livonia plant manager sees are a subcontract in disguise: a local applicator, someone else's resin, and a warranty that lives in the gap between them. When the floor fails, the applicator points at the material and the material supplier points at the installation — and your slab is the evidence locker.
Maverick manufactures what it installs. The specification, the material, and the crew arrive together, and the build-up recommendation you approve is the document our installers work against. Material and workmanship are warranted by the same company that engineered the system — one warranty, one signature, no gap for your project to fall into.
A manufacturing production floor before and after — worn concrete rebuilt as a seamless resinous system, phased around a working operation.
See more real installs in the project gallery, or start from your building type on the manufacturing flooring page.
Garage & Basement Floors for Livonia Homes
The same industrial-grade materials we install in plants go down in Livonia garages and basements — seamless epoxy and fast-cure systems engineered for wheel traffic, road salt, and everyday spills, with decorative broadcast and metallic finishes where the floor should look as good as it performs.
You get the same structure a plant gets: the material and the installer are the same company, and the floor is matched to how you actually use the space — parked cars, a shop corner, a finished basement, or all three.
Where to Start
- Garage floors. Seamless, cleanable systems built on the same MavCoat epoxy and fast-cure chemistry as our commercial work — see the fast-cure systems page.
- Decorative finishes. Broadcast and metallic epoxy floors that bring showroom depth to a residential slab.
- Basements. Seamless resinous floors over concrete — a cleanable surface instead of bare slab or carpet.
Livonia Questions, Answered Straight
How fast can you get to a Livonia plant?
Livonia is home-market territory — a short drive from our Farmington Hills headquarters and manufacturing facility. Scope requests get an engineered recommendation and budget direction within 48 hours — that's our standing promise — and site assessments are typically scheduled within days. If you're up against a hard shutdown window, call (313) 889-2526 and we'll work to your date.
Which flooring systems do you install in Livonia machine shops and manufacturing plants?
The systems built for oil, coolant, wheel traffic, and point loads: MavCoat 100% solids epoxy from a nominal 16–30 mils for production and warehouse traffic up to ¼″ MavClad EM epoxy mortar for heavy duty, MavCrete UM urethane cement where thermal shock or washdown is in play, and MavPatch, MavRapidPatch, and MavGrout USP for concrete repair — every quantitative claim traced to its technical data sheet.
Do you install residential garage and basement floors in Livonia?
Yes. Livonia homeowners get the same industrial-grade materials we install in plants — seamless epoxy and fast-cure systems for garage floors and basements, engineered, manufactured, and installed by the same company. Tell us the space and how you use it, and we'll recommend the right build-up.
Beyond Livonia, we cover all of Wayne, Oakland, and Macomb counties — see the Metro Detroit page or the full list of service areas.
Scope Your Livonia Floor
Tell us the square footage, traffic, and exposure. An engineered build-up recommendation and budget direction come back within 48 hours — that's our promise, a short drive from our Farmington Hills headquarters and manufacturing facility.