Epoxy & Industrial Flooring Contractor — Taylor, Michigan
Maverick Performance Solutions is an industrial resinous flooring manufacturer and contractor serving Taylor and the Downriver communities of Wayne County. We engineer, manufacture, and install our own epoxy, urethane cement, epoxy mortar, and concrete repair systems for Taylor's industrial plants, logistics floors, and residential garages — a short drive from our Farmington Hills headquarters and manufacturing facility, with an engineered recommendation within 48 hours.
Downriver Floors, Home-Market Response
Taylor is working Downriver — steel-adjacent industry, airport-corridor logistics, service shops on Telegraph and Eureka, and street after street of garages that see Michigan winters through a snow shovel. It's a short drive from our Farmington Hills headquarters and manufacturing facility, which means Taylor gets home-market treatment: site assessments scheduled within days, crews and factory-batched material mobilized from our own shop, and an engineered recommendation within 48 hours.
We've already worked here. Service bays in Taylor were rebuilt with MavClad EM epoxy mortar finished in MavCoat SLE — a seamless, chemical-resistant floor that stands up to motor oil, solvents, and constant wheel traffic in tight quarters. That's the kind of floor Downriver buildings actually need: engineered for the abuse, not sold off a rack.
What Taylor Facilities Get From Maverick
- Site assessments within days. Traffic, chemistry, moisture, and joints get measured on your slab before anything is specified.
- A response within 48 hours. Scope requests come back with an engineered build-up recommendation and budget direction inside two days — that's our standing promise.
- Mobilization from our own shop. Crews and factory-batched material stage out of Farmington Hills — efficient, project-specific mobilization, quoted up front.
- Shutdown-window scheduling. Weekend, overnight, and holiday installs are standard practice — we phase floors around production, not the other way around.
- One accountable party. We design the system, manufacture it, install it with our own crews, and warrant the result — no manufacturer-versus-installer finger-pointing.
The Systems Taylor's Facilities Actually Need
Downriver industry, airport-corridor logistics, and residential garages fail in different ways — and each gets its own engineered answer. Every system below is engineered, manufactured, and installed by Maverick, matched to your traffic, chemistry, and shutdown window.
Epoxy Flooring
MavCoat 100% solids epoxy systems — self-leveling, high-build, broadcast, and metallic — from a nominal 16–30 mils for production and warehouse traffic up to ¼″ MavClad EM epoxy mortar for the heaviest Downriver duty.
Epoxy Flooring ContractorWarehouse & Logistics Floors
Forklift-rated epoxy bodies, joint rebuilds, and coated-in demarcation striping for Taylor's airport-corridor distribution and logistics buildings — installed aisle-by-aisle so operations never fully stop.
Warehouse Floor CoatingsConcrete Floor Repair
Spalls, failed joint shoulders, bolt holes, and deteriorated slabs rebuilt with MavPatch, MavRapidPatch, and MavGrout USP — many repairs back in service the same shift.
Concrete Floor RepairUrethane Cement
MavCrete UM cementitious urethane rated for thermal shock through 250°F washdown — the answer for Downriver food operations, commercial kitchens, and hard wet environments.
Urethane Cement FlooringMetallic Epoxy
Showroom-grade MavCoat Metallic floors for Taylor's dealerships, retail spaces, and standout garages — decorative depth on an industrial-duty body.
Metallic Epoxy FlooringCommercial Kitchen Flooring
Seamless, coved MavCrete floors that replace failing quarry tile — sloped to drain, slip-textured by zone, and installed overnight so the kitchen opens on time.
Commercial Kitchen FlooringSpecifying a floor rather than buying one? Full build-ups, cross-sections, and typical properties live on the MavCoat epoxy, MavCrete urethane cement, and MavClad troweled mortar system pages, and specifiers can assemble any build layer-by-layer in the System Builder.
Why a Manufacturer-Installer Beats a Re-Seller
Most flooring bids in Taylor are a subcontract: a local applicator, someone else's resin, and a warranty that lives in the gap between them. Maverick manufactures what it installs — nine Mav product families and 31 products, every one traced to its own technical data sheet — so the specification, the material, and the crew arrive together. The build-up recommendation you approve is the document our installers work against, and material and workmanship are warranted by the same company that engineered the system. One shop, one factory, one engineering desk in Farmington Hills, one signature on the result.
Garage & Basement Floors, Industrial Chemistry
Taylor's garages take the same abuse as its plants, just at smaller scale: hot-tire pickup, road salt dragged in all winter, slush that sits on bare concrete until spring. We install the same MavCoat epoxy and fast-cure chemistry we put in industrial buildings — broadcast, solid-color, and MavCoat Metallic finishes — scaled to a two-car garage or a basement floor.
The difference between our garage floor and a kit off a shelf is the same as everywhere else on this page: the material is manufactured in our own Farmington Hills factory, installed by the same crews that do our plant work, and warranted by the company that made it. See the decorative end of the range on the metallic epoxy page, or the rapid-turnaround chemistry on the fast-cure systems page.
What a Taylor Garage Floor Gets
- Industrial-duty material. The same MavCoat epoxy families we install in production buildings — not a homeowner-grade kit with our name on it.
- Concrete repair first. Spalls, pitting, and failed joints rebuilt with MavPatch and MavRapidPatch before anything is coated — the finish is only as good as the slab under it.
- Finish options by taste. Broadcast texture for grip, solid color for a clean shop look, or MavCoat Metallic with MavTints for a floor people ask about.
- Fast-cure scheduling. Fast-cure systems are built for tight turnarounds — we plan the install around when you need your garage back.
- One accountable party. Manufactured, installed, and warranted by the same company — the same promise our industrial customers get.
Floors We've Handed Back Nearby
Real installs in Taylor and across the metro — each engineered to the traffic and chemistry it actually carries. More in the project gallery.
Oil-Change Service Bays, Built for Oil and Wheels
Service bays in Taylor rebuilt with MavClad EM epoxy mortar finished in MavCoat SLE — a seamless, chemical-resistant floor that stands up to motor oil, solvents, and constant wheel traffic in tight quarters.
See ProjectsTwo Beverage Plants, Bottling & Production Halls
Bottling and production halls at two Detroit beverage plants resurfaced with MavCrete UM urethane cement under a MavSeal UPA topcoat — engineered for washdown cycles and organic acid exposure, installed around live production schedules.
See Projects
A Detroit bottling hall — MavCrete UM urethane cement placed around live pallet traffic, phased so production never fully stopped. The same crews and the same factory-batched material serve Taylor.
Where We Work Downriver
Taylor and the Downriver communities of Wayne County, plus full coverage across Metro Detroit. Beyond the metro, we install across Michigan, Ohio, and the Midwest — see all service areas.
- Taylor
- Southgate
- Allen Park
- Lincoln Park
- Wyandotte
- Romulus
- Woodhaven
- Brownstown
- Riverview
- Trenton
- Dearborn
Taylor Questions, Answered Straight
How fast can you be on site in Taylor?
Taylor sits inside our home market — a short drive from our Farmington Hills headquarters and manufacturing facility. Scope requests get an engineered recommendation and budget direction within 48 hours — that's our standing promise — and Downriver site assessments are typically scheduled within days. If you're staring at a hard shutdown window, call (313) 889-2526 and we'll work to your date.
What flooring systems work best for Downriver logistics and warehouse floors?
Forklift-rated epoxy bodies, joint rebuilds, and coated-in demarcation striping — installed aisle-by-aisle so distribution operations never fully stop. MavCoat 100% solids epoxy carries the daily wheel traffic, MavJoint JF rebuilds the joints that pallet jacks find first, and heavy-abuse zones step up to MavClad EM epoxy mortar. Every build-up is matched to your traffic, chemistry, and shutdown window.
Do you install residential garage floors in Taylor?
Yes. Taylor garages and basements get the same MavCoat epoxy and fast-cure chemistry we install in plants — engineered for hot-tire pickup, road salt, and winter slush, in broadcast, solid-color, and MavCoat Metallic finishes. It's an industrial-duty floor scaled to a two-car garage, installed by the same crews and manufactured in the same Farmington Hills factory.
Running a distribution or plant floor under production traffic? See how these systems hold up on our manufacturing flooring page.
Scope Your Taylor Floor
Tell us the square footage, traffic, and exposure — plant, warehouse, or two-car garage. An engineered build-up recommendation and budget direction come back within 48 hours — that's our promise, a short drive from our Farmington Hills headquarters and manufacturing facility.