Resurface with Purpose
Engineered Flooring Systems. Unmatched Performance.
Maverick Performance Solutions designs, manufactures, and installs resin flooring systems built for the hardest-working facilities in the Midwest — food and beverage plants, manufacturing floors, parking structures, and everything in between. One contractor. One product line. One standard.
35
Engineered Products, Manufactured In-House
100+
Standard Details & System Shop Drawings
USDA
Systems for Federally Inspected Facilities
48-HR
Response Time — Our Promise
Flooring Systems
Built for the Demands of Your Floor
Eight engineered systems. Each one specified, installed, and warranted by the same team that manufactures the products that go into it.
Looking for a contractor rather than a system? Start with our industrial flooring contractor page for plant, warehouse and processing floors built on MavClad epoxy mortar and MavCrete urethane cement. Under it, the epoxy flooring contractor page covers coatings, broadcast and troweled epoxy.
Epoxy Systems
Troweled MavClad epoxy mortar builds the floor — MavCoat coatings and MavSeal topcoats finish it — for abrasion, impact, and chemical exposure. The workhorse of industrial flooring.
View SystemUrethane Mortar Systems
Thermal-shock-resistant MavCrete urethane mortar for wash-down environments — engineered to support USDA/FSIS sanitation requirements and HACCP plans in food and beverage processing.
View SystemFast-Cure Systems
Return-to-service in hours, not days. Fast-cure options engineered into any Maverick floor — MavSeal UPA polyaspartic topcoat, MavCoat FC fast-cure epoxy basecoat, MavRapidPatch and MavPolyPatch repairs — for facilities that can't afford downtime.
View SystemParking Deck & Traffic Coatings
A sealed, slip-resistant driving surface that keeps water and chlorides out of structural concrete and stands up to turning traffic on elevated decks and ramps.
View SystemConcrete Repair
Epoxy patching and resurfacing for spalled joints, deteriorated slabs, and damaged substrates — restored before a single coat goes down.
View SystemJoint Fillers & Sealants
Semi-rigid fillers and sealants that protect joint edges from hard-wheel traffic. Six standard colors to match any floor.
View SystemServing Michigan, Ohio & the Midwest
Maverick engineers and installs industrial resinous flooring from our Taylor, Michigan headquarters, with material batched in our own plants — crews on plant floors across Metro Detroit, Grand Rapids, Lansing, Ann Arbor, Flint, Toledo, Cleveland, and Columbus. One accountable party, from formulation to warranty, wherever your facility runs. See our service areas.
New · Interactive Tool
Build Your Custom System — Watch It Come to Life
Click primer, then mortar, then aggregate, then a topcoat. Every Maverick product in one interactive stack. Six factory-standard systems ready in one click — or design your own from scratch. Export the finished layup as a labeled shop-drawing-quality PNG for your submittal, RFI, or design deck.
New · Design Tool
See the Finished Floor Before You Order It
Pick a kitchen, plant, warehouse, service bay, showroom, corridor, parking deck, or garage, then pick any of the 139 stock Maverick colors and watch the floor render at true scale with the room's own lighting. Adjust the flake blend, compare two colors side by side, upload a photo of your own floor, and send the exact design to a quote in one click.
For Specifiers
The Architect Center: Details, Drawings, and Specs — Ready to Drop In
Specifying resinous flooring shouldn't mean redrawing cove bases from scratch. Our Details & Drawings library gives architects and engineers a complete set of standard details — cove bases, drain transitions, terminations, joints, and penetrations — organized by system and ready for your construction documents.
- Standard details for every system — epoxy, cementitious urethane, polyaspartic, parking deck, and joint systems, each with its own detail set.
- CSI 3-part specifications — Division 09 resinous flooring sections, formatted for direct insertion into your project manual.
- Indexed and searchable — every detail carries a MAV detail code, one-line description, and category, so you find the right condition fast.
- Project support on call — our technical team reviews substrate conditions, system selection, and edge cases with you before bid day.
Isometric Shop Drawings
Every System, Drawn Before It's Specified
Eighteen ready-to-download standard isometric shop drawings — or build any custom system combination in seconds with the interactive System Builder. Each drawing shows the full system build-up, layer by layer, ready to drop into your construction documents.
MavCrete UM
Download PDF
Manufactured by Maverick
Our Floors Start with Our Products
We don't install someone else's chemistry. Nine Mav product families and thirty-five products — every Maverick system is built from product lines we formulate, batch, and stand behind.
MavCoat
Epoxy and specialty coatings — self-leveling SLE, MavPrime EP primer, rapid-cure FC, metallic, flexible, ESD, moisture vapor barrier, and polyurea.
View Products
MavCrete
Cementitious urethane mortar and self-leveling urethane cement — the bodies under urethane-cement MavTop broadcast systems. Thermal shock resistant through 250°F washdown. Engineered to support USDA/FSIS sanitation in inspected food and beverage facilities.
View Products
MavSeal
UV-stable polyaspartic and aliphatic urethane topcoats — UPA and HWU. Gloss and color retention under continuous forklift and pedestrian wear.
View Products
MavTop
Decorative broadcast systems — quartz, flake, stone, chips, or other media over urethane or epoxy bodies — with fast-cure and standard-cure options, infinite color combinations, and unlimited design options.
View Products
MavPatch
Epoxy and rapid-cure polyurea patching compounds — including MavRapidPatch with walk-on strength in minutes for time-critical shutdowns.
View Products
MavJoint
Semi-rigid JF joint filler for control and construction joints. Protects joint edges from wheel traffic damage and prevents debris accumulation.
View Products
MavGrout
Cementitious urethane sloping and patching grout, applied 1/2" to 3" thick for infilling, leveling, pitching, and equipment pads.
View Products
MavClad
Troweled epoxy mortar for floors and 4-6" integral cove base. Seamless chemical-resistant protection where floor meets wall.
View Products
MavTints
Universal tinting system compatible with all MavCoat, MavSeal, and MavCrete products. Precise color matching for custom requirements.
View ProductsHave a Floor That Has to Perform?
Tell us about your facility, your schedule, and your exposure conditions. A Maverick project engineer will respond within 48 hours with a recommended system and a path to install.