Flooring Systems

Eight engineered resin systems. One standard: the floor performs, or it doesn't ship. Every Maverick system is specified to the slab, the traffic, and the chemistry it has to survive — not pulled off a shelf.

For Facility Decision-Makers

Specified to the Environment, Not the Brochure

A freezer floor fails differently than a forklift aisle. A brewery floor fails differently than both. Choosing a flooring system is a risk decision: thermal shock, point loads, chemical exposure, sanitation regimes, and how many hours of downtime your operation can absorb during installation.

The summaries below are written to get you to the right system fast. Each system page includes the full build-up cross-section, typical performance properties, and direct links to CAD details and CSI specifications for your design team.

Every Maverick System Includes

  • Substrate evaluation — moisture testing, profile verification, and slab condition review before a drop of resin goes down.
  • Mechanical surface preparation — shot blasting or diamond grinding to the specified concrete surface profile.
  • Manufacturer-direct materials — MavCoat, MavCrete, MavSeal, MavTop, MavClad, MavGrout, MavPatch, MavJoint, and MavTints product lines, installed by the people who make them.
  • Documented build-up — mil thicknesses logged per area, with closeout documentation for your facility file.
  • 48-hour response — questions during design or after turnover get answered within two business days.

Rather Build Than Browse?

Stack primer, mortar, aggregate, and topcoat in the interactive System Builder — then export a labeled shop-drawing PNG straight into your submittal.

Launch the System Builder
The Lineup

Eight Systems. Matched to the Job.

Start with the environment. The right system follows.

Epoxy Systems

MavCoat epoxy — SLE self-leveling, PC prime & coat broadcast, HB high-build, and Metallic finishes over MAVPRIME EP. The workhorse for plants, warehouses, and showrooms that need durability with a clean, sealable surface.

Best for: Manufacturing · Warehousing · Automotive · Labs View Epoxy Systems

Urethane Mortar Systems

MavCrete UM urethane mortar — with UF-HD flake and UQ-HD quartz heavy-duty systems — engineered for thermal shock, hot washdown, and organic acid exposure. The standard answer for USDA-, FDA-, and HACCP-driven food and beverage environments.

Best for: Food & Beverage · Dairy · Breweries · Commercial Kitchens View Urethane Mortar Systems

MavTop Broadcast Systems

Fast-cure urethane and epoxy cement mortars broadcast with quartz or decorative flake to ¼″, then sealed with MavSeal UPA — thermal-shock-rated, slip-resistant floors for wet, hot-washdown, and chemically aggressive processing environments.

Best for: Food & Beverage · Breweries · Kitchens · Healthcare View MavTop Systems

MavClad Troweled Systems

MavClad EM 100% solids epoxy mortar, troweled at a full ¼″ over MavPrime EP and finished with a pigmented topcoat — a seamless, chemically resistant overlay that rebuilds worn slabs and survives heavy mechanical abuse.

Best for: Warehousing · Manufacturing · Chemical · Labs View MavClad Systems

Fast-Cure Systems

The MavCoat FC hybrid epoxy-polyurea rapid-cure basecoat and MavSeal UPA polyaspartic topcoat return floors to service in hours, not days. Full-system installs over a weekend shutdown — or overnight, bay by bay — without sacrificing UV stability or abrasion resistance.

Best for: Distribution · Retail · Aviation · 24/7 Operations View Fast-Cure Systems

Parking Deck & Traffic Coatings

MavCoat Flex flexible epoxy and the MavCoat Polyurea waterproof membrane bridge moving cracks and stop chloride-laden water before it reaches rebar — finished with a MavSeal HWU high wear urethane topcoat. Drive lanes, ramps, and turn zones get reinforced wear courses.

Best for: Parking Structures · Ramps · Plazas · Mechanical Rooms View Parking Deck Coatings

Concrete Repair

MavPatch Epoxy, MavRapidPatch, and MavPolyPatch rebuild spalled joints, pitted aprons, and failed patches to better-than-original strength — backed by MavGrout USP sloping grout and MavClad EM epoxy mortar for full restoration or pre-overlay prep.

Best for: Dock Areas · Joint Spalls · Slab Restoration · Pre-Overlay Prep View Concrete Repair

Joint Fillers & Sealants

MavJoint JF semi-rigid joint filler protects joint edges from hard-wheel traffic and keeps washdown water out of the slab. Six standard colors to match or contrast your floor.

Best for: Distribution Centers · Freezer Floors · Forklift Aisles View Joint Systems
For Design Teams

Isometric Shop Drawings, System by System

Sixteen standard Maverick build-ups, each documented with a formal isometric shop drawing — or generate any custom system combination in seconds with the interactive System Builder. Preview a few below, or browse all 16 in the Details & Drawings library.

Browse All 16 Shop Drawings

Not Sure Where to Start?

Two Ways to Get to the Right System

If you're specifying, the Architect Center has CAD details, CSI 3-part specifications, and a system selector built for design teams. If you're operating a facility, skip the homework — describe your environment and we'll recommend a build-up within 48 hours.

Visit the Architect Center Describe Your Facility
1,000+ Installations Behind Our Crews
100+ Standard Details & System Shop Drawings
48-HR Response Time
USDA Systems for Federally Inspected Facilities

Get a System Recommendation

Send us your square footage, traffic, and exposure conditions. You'll have a recommended build-up and budget range within 48 hours.

Get a Quote